VESSEL ELECTRICAL PROBLEMS |
||||||||
Click on the pictures to see the full size image and see details about the problem that is shown. |
||||||||
|
In connection with our work we see lots of different vessels and their electrical systems. When we encounter problems we try to take pictures of the conditions we find. Additionally when conducting vessel electrical surveys and inspections we take pictures of problems encountered. Displayed on this page are small copies of a few of these pictures.
When you point your cursor at a picture and click on it, an enlarged version of the picture will be displayed with additional descriptive text, arrows to specific problems and in some cases additional pictures of the problem or a picture of what was done to fix the problem. |
||||||||
|
||||||||
![]() |
||||||||
Use of the wrong size connectors. |
Incorrect ground and neutral bus with bad crimps. |
Uncovered AC panel and bad crimps.. |
||||||
![]() |
![]() |
![]() |
||||||
Inverter battery fuse without a disconnect switch. |
Bad receptacle box, |
Exposed power terminal snd use of wire nut. |
||||||
![]() |
![]() |
![]() |
||||||
Incorrect wiring and color coding in 240V circuit. |
Potential arc points and dangers due to poor housekeeping. |
Circuit breaker located where it is difficult to access. |
||||||
![]() |
||||||||
Unsecured battery and unsupported battery cable. |
||||||||
| As we assemble additional "problem" and "before & after" pictures we will be adding them to this page. | ||||||||
|
||||||||
| SITE INDEX | WT HOME PAGE | |
||||||||